The LPG Detector is designed to work with a Merlin control panel. The LPG detector are fitted at approximately 50cm from ground height in order to detect any LPG build up.
The detector should be installed at low level as LPG build up occurs from the ground upwards due to the dense nature of the gas. At 10% of the low explosion level the detector will trigger the attached Merlin system causing an alarm state and instant isolation of the gas valve.
This can only be reset by finding the source of the build-up, allowing the detector head to clear, and resetting the attached Merlin panel.
Can work in conjunction with other Merlin Gas Safety Systems to ensure maximum safety