CVDDG-550 550sq Double Deflection Grille - White - STOCK ITEM

CVDDG-550 550sq Double Deflection Grille - White - STOCK ITEM
550mm x 550mm Opening Size (598mm x 598mm Overall Size) Horizontal/Vertical Adjustment - RAL9010 Pure White
From £76.18
inc. VAT (where applicable)

Double Deflection Grille

Features

Excellent all-purpose supply air grille
Air throw adjustable in both horizontal and vertical planes
Suitable for wall, ceiling or duct mounting
Extruded aluminium construction
Optional rear damper can be added to control air volumes
70% Free Area (Approx)
32mm flat frame with countersunk screw holes

Product Overview

Double Deflection Grilles have two sets of individually adjustable blades – a front set of horizontal blades and a second set of vertical blades set at 90 degrees to each other.

Gaps between the blades are sufficient to allow easy adjustment of blades, enabling the user to create custom blow patterns. Whether these be targeted towards one area, or fanned out to affect a wider area is entirely your choice.

As noise generation and pressure drops are slightly higher than with a single deflection grille, the double deflection grille is better suited to supply air applications.

All square sizes from 150sq – 550sq rising in 50mm increments are held in stock. Standard stocked grilles are powder coated to RAL 9010 (Pure White). Rectangular grilles and powder coated finishes are made-to-order, usually within 5 working days.

Opposed blade dampers can be factory fitted to your double deflection grille. Adjustable through the grille blades with a screwdriver, opposed blade dampers allow easy volume control.

The Double Deflection Grille can also be made-to-order in sizes other than the standard sizes listed.

The smallest dimensions available are: 100mm x 100mm (W x H).

The largest dimensions available are: 2900mm x 2900mm (W x H).

For blade lengths above 570mm mullions will be used.

Application

Double Deflection grilles are better suited for use as supply air outlets in a variety of settings including ceilings, walls and ducts.

Having a second row of blades reduces the free area by around 10%, therefore we do not recommend using a DD for extract purposes.

Construction

Fabricated entirely from extruded aluminium. Two rows of adjustable blades set within a frame. Blades held in place with high tensile spring wire and starlock washers.

For overall size including flange, add 48mm to width and height.

CVDDG - Sizing

In order to calculate the exact overall face dimensions of the grille +48m must be added to the nominal dimensions.

Nominal Dimensions = Opening Size.

This is the number shown in the part codes e.g. CVDDG-550

For example:

CVDDG-550: The nominal opening size is 550mm x 550mm. The overall size including frame is 598mm x 598mm.

Actual Neck Size: For clearance within the aperture a standard tolerance of 5mm (2.5mm each side) is deducted from the nominal opening size for grilles sizes 150mm sq - 550mm sq (above 550mm sq the tolerance increases to -15mm)

For example:

CVDDG-550: The nominal opening size is 550mm x 550mm. The actual neck size is 545mm x 545mm.